By the Ton vs By the Yard: How to Compare Prices

A ton is a weight. A cubic yard is a space. Bulk material is sold one way or the other, so two prices for the same stone can look far apart when they are not. To compare them, you need one number: how many tons are in a cubic yard of that material.

This guide explains why WAYS® sells by the ton, how to set a price per cubic yard beside a price per ton, and what our smallest order is. It covers the materials we deliver around New Orleans.

Key Takeaways

  • A ton is 2,000 pounds. A cubic yard is 3 feet by 3 feet by 3 feet, or 27 cubic feet.
  • Every material has its own weight for a cubic yard. Our catalog holds a figure for each one we sell.
  • Price per ton = price per cubic yard divided by the tons in a cubic yard.
  • Compare delivered totals for your job, not unit prices alone.
  • Our smallest order of a material sold by the ton is 3 tons.

What Each Unit Measures

A ton measures weight. In the United States, a ton is a short ton: 2,000 pounds.

A cubic yard measures space. It is a cube 3 feet on each side, or 27 cubic feet.

The two are not tied to each other. A cubic yard of stone and a cubic yard of mulch fill the same space, but the stone weighs far more. So a ton of stone fills a small space, and a ton of mulch fills a large one. That is why one conversion number never fits every material.

For the general math, with worked examples in both directions, see our guide to converting tons to cubic yards.

Why We Sell by the Ton

Each material we sell has one unit: the ton, the cubic yard or the truckload. Its product page says which. Where we sell by the ton, these are the reasons.

A scale gives the same answer for everyone. Weight is read on a scale. Scales used to buy and sell goods are tested against national rules, written by the NIST Office of Weights and Measures in its Handbook 44. Space in a truck bed is harder to pin down. It changes with how high the material is heaped and how much it settles on the drive.

A truck's legal limit is weight. Road limits on trucks are set in pounds, by axle and in total, under the federal bridge formula. Stone and sand are dense, so a truck reaches its weight limit before its bed is full. Selling by the ton matches the way a truck is loaded.

You pay for material, not air. Loose material has gaps between the pieces. When it is dumped, spread and packed, it settles and takes less space. Its weight stays the same.

Water is the one thing weight does not fix. Wet sand weighs more than dry sand, so a ton of wet sand fills a little less space. Our figures are for the material as sold.

How Many Tons Are in a Cubic Yard?

It depends on the material. Stone and sand are dense. Soil is lighter, and mulch is lighter still.

Each material we sell has its own figure in our catalog, and the table on this page shows it. To convert any amount of one material, in either direction, use the tons to cubic yards tool. It uses the same figures.

The math is one step either way:

  • Tons = cubic yards x the tons in a cubic yard
  • Cubic yards = tons / the tons in a cubic yard

How to Compare a Price per Cubic Yard With a Price per Ton

Put both prices in the same unit, for the same material. Then compare what the whole job costs, delivered.

You have You want Do this
A price per cubic yard A price per ton Divide it by the tons in a cubic yard
A price per ton A price per cubic yard Multiply it by the tons in a cubic yard
Cubic yards for your job Tons to order Multiply by the tons in a cubic yard, then round up
Tons Cubic yards of space Divide by the tons in a cubic yard

Three checks keep the comparison fair.

Compare the same material. "Gravel" or "#57 stone" can be a different rock from one seller to the next, with a different weight. Our #57 Limestone is crushed limestone. If a seller names a weight for a cubic yard of their stone, use their figure for their price and ours for ours.

Compare delivered totals. A unit price leaves things out: delivery, small-order charges, the minimum and tax. Work out the total for your job from each seller. With us, you see the delivered price for your address before you pay.

Round up the same way. We sell in whole units, rounded up. Round the other quote the same way, so both totals buy the same amount.

Start From the Job, Not the Price

The simplest way to compare is to begin with what your job needs.

  1. Measure in feet: length, width and depth. A depth in inches divided by 12 is feet.
  2. Work out cubic yards: length x width x depth / 27. A 20 by 10 foot area, 4 inches deep, is 20 x 10 x 0.33 / 27, or about 2.5 cubic yards.
  3. Convert to tons with the material's own figure, and round up to a whole ton.
  4. Price that amount from each seller, delivered to your address.

The material calculator does steps 2 to 4 for you. Pick the material, enter your sizes, and it shows what to order in the unit we sell it in, with the delivered price. Some materials are light for their size, like Hardwood Mulch; some are dense, like Crushed Concrete and River Sand. The calculator uses each one's own figure.

The 3-Ton Minimum

Our smallest order of a material sold by the ton is 3 tons. A material sold by the cubic yard or by the truckload has its own minimum. Each product page shows the minimum for its material.

Need less than the minimum? You can still order it. You pay the minimum charge, and we deliver the amount you ordered. Your price says so before you pay.

Frequently Asked Questions

Is it cheaper to buy by the ton or by the cubic yard?

Neither unit is cheaper by itself. Convert both prices to the same unit for the same material, then compare the delivered total for your job.

How many tons are in a cubic yard?

It depends on the material: stone and sand are dense, and mulch is light. Our catalog holds a figure for each material we sell, and the tons to cubic yards tool converts any amount with it.

How do I turn a price per cubic yard into a price per ton?

Divide the price per cubic yard by the tons in a cubic yard of that material. The answer is the price per ton, ready to set beside ours.

What is the smallest order?

For a material sold by the ton, 3 tons. Under that, you pay the minimum charge, and we deliver the amount you ordered.

Does wet material weigh more?

Yes. Water adds weight, so a ton of wet sand fills a little less space than a ton of dry sand. Our figures are for the material as sold.

See Your Price for Your Address

You know how to compare. Enter your address. If it's in our delivery area, you'll see the real delivered price before you pay. Just outside it, you'll see: "You're just outside our standard area for this material. We'll price it by hand and reply within 2 business hours."

Get your delivered price for #57 Limestone

Materials for this job

Sources

  1. NIST Office of Weights and Measures
  2. bridge formula

Related guides

Delivered by city

#57 Limestone

Crushed Concrete

River Sand

Hardwood Mulch