French Drain Gravel in New Orleans: What to Use

Use #57 Limestone for a French drain. It's clean, angular crushed limestone, about 3/4 to 1 inch, with no fines, so water runs straight through the open space between the stones. Line the trench with filter fabric, set a perforated pipe on a bed of stone, cover it with more stone, and fold the fabric over the top.

In a city where a summer storm can leave a yard under water for a day, the stone you pick decides whether the drain keeps working or clogs within a few seasons.

Key Takeaways

  • #57 Limestone is the French drain stone: clean, angular, about 3/4 to 1 inch, no fines.
  • River Gravel is for surface drainage and decorative cover, not the trench. Use #57 Limestone in the drain.
  • Stone with fines in it, sand, fill dirt and mulch all clog or fail in a drain. Keep them out of the trench.
  • Filter fabric wraps the stone and keeps silt and clay out, which matters in the fine soils around New Orleans.
  • Stone needed in cubic yards = trench length x width x depth in feet, divided by 27.
  • Call 811 before you dig, so buried utility lines are marked first (811).

What Is a French Drain?

A French drain is a trench filled with stone, usually with a perforated pipe in the bottom, that collects water from the ground around it and carries it somewhere it can leave. It doesn't make water disappear. It gives water an easy path, and the trench has to fall steadily toward an outlet: a ditch, a lower part of the yard, or another point where the water can drain away legally.

Around New Orleans, the usual reasons to build one are a yard that holds water after rain, a low side of the house that stays wet, or a downspout that dumps water where it pools.

Why #57 Limestone Is the Right Stone

#57 Limestone is clean crushed limestone, about 3/4 to 1 inch, with no fines. Three things make it the drain stone:

It's clean. With no dust or fines between the stones, there's nothing to wash down and plug the pipe or the fabric.

It's angular. The broken faces keep the stones from settling into a tight mass, so the trench keeps its open space for water.

It's the right size. Stones about 3/4 to 1 inch are big enough to leave room for water and small enough to bed a pipe and fill a narrow trench.

What About River Gravel or Pea Gravel?

River Gravel is natural, water-worn stone, about 3/4 to 1-1/2 inches, with no sharp edges. It drains freely and handles heavy rain without washing out, so it suits surface drainage and decorative cover. For the trench itself, use #57 Limestone.

Pea Gravel is small, smooth, rounded stone, about 3/8 inch. It works for light drainage around downspouts and pool decks, but it isn't the main stone for a French drain: angular #57 keeps more open space for water.

What Never Goes in a French Drain

Each of these materials does a good job somewhere else. In a drain, they clog it or fail.

  • Crushed Concrete. Never put it in a drain: its fines clog the pipe and the fabric. It belongs under a driveway or slab as a packed base. See Crushed Concrete.
  • #610 Limestone. It's a blend of chips and fines, about 3/4 inch down to dust, and the fines clog a drain. See #610 Limestone.
  • Fill dirt. Don't use Spillway Dirt in the trench: silt holds water. Use it to reshape the yard so rain runs away from the house.
  • Sand. Never use River Sand in the trench, because fine sand clogs a drain.
  • Garden soil and mulch. Soil holds water, and mulch floats and rots. Neither belongs in a drain.

How to Build a French Drain, Layer by Layer

  1. Call 811 first. It's the free national before-you-dig service, and buried utility lines get marked before you break ground (811).
  2. Dig the trench. Keep a steady fall from the high end to the outlet, so water never sits in a dip. Check it with a level and string line, not by eye.
  3. Line it with fabric. Lay non-woven filter fabric (geotextile) along the bottom and up both sides, with enough left over at the top to fold back across.
  4. Add a bed of stone. Spread a few inches of #57 Limestone along the bottom.
  5. Set the pipe. Lay perforated drain pipe on the stone, keeping the fall toward the outlet.
  6. Cover with stone. Fill around and over the pipe with #57 Limestone.
  7. Wrap and finish. Fold the fabric over the top of the stone. Cap the trench with stone for a visible drain, or with Premium Garden Soil and sod to hide it.

The stone is what we deliver; the fabric and pipe come from a home-improvement store.

Why the Fabric Matters in New Orleans

Much of the ground around New Orleans is fine silt and clay laid down by the Mississippi River; the city sits on the river's deltaic plain (USGS, 2007). Those fine particles move with water, and without a barrier they wash into the stone and the pipe, filling the open space a little more after every storm.

Filter fabric lets water through and holds the soil back. Wrapping the stone, not just lining the bottom, keeps the whole trench clean. It's a small extra step that adds years to a drain.

How Much Gravel for a French Drain?

Measure the trench in feet: length, width and depth. Then:

Cubic yards = length x width x depth (in feet) / 27

A trench 50 feet long, 1 foot wide and 18 inches deep is 50 x 1 x 1.5 / 27, or about 2.8 cubic yards of stone. Orders are in whole units, rounded up. The pipe takes up a little of that space, but order the full trench volume: some stone goes into low spots along the bottom, and a little extra on top finishes the drain.

The material calculator has a Trench shape that does this math and turns it into how much #57 Limestone to order, in the unit we sell it in. The coverage calculator shows how far a yard, a ton or a truckload spreads at your depth.

Frequently Asked Questions

What is the best gravel for a French drain?

#57 Limestone: clean, angular crushed limestone, about 3/4 to 1 inch, with no fines. Water runs through the open space between the stones, and there's no dust to clog the pipe.

How much gravel do I need for a French drain?

Multiply the trench length by its width and depth, all in feet, and divide by 27 for cubic yards. A 50-foot trench, 1 foot wide and 18 inches deep, takes about 2.8 cubic yards; orders are in whole units, so round up.

Do I need fabric for a French drain?

It's strongly recommended, especially in the fine silt and clay soils around New Orleans. Filter fabric lets water through and keeps soil from washing into the stone and the pipe.

Can I use crushed concrete in a French drain?

No. Its fines clog the drain and the fabric. Crushed Concrete is a packed base, and #57 Limestone is the drain stone.

Can I use river gravel or pea gravel instead of #57 stone?

No. River Gravel is for surface drainage and decorative cover, not the trench. Pea Gravel only suits light drainage around downspouts and pool decks. #57 Limestone is the French drain stone: it keeps more open space for water.

See Your Price for Your Address

You know the stone and how much of it. Enter your address. If it's in our delivery area, you'll see the real delivered price for #57 Limestone before you pay. Just outside it, you'll see: "You're just outside our standard area for this material. We'll price it by hand and reply within 2 business hours."

Get your delivered price for your address

Materials for this job

Sources

  1. 811
  2. USGS

Related guides

Delivered by city

#57 Limestone