How Much Sand Do I Need? Beds, Pipes and Pool Bases
Multiply the length by the width in feet, then by the depth in feet (inches divided by 12), and divide by 27. The answer is cubic yards of sand. One cubic yard covers 324 square feet at 1 inch deep, 162 square feet at 2 inches, and 81 square feet at 4 inches.
Key Takeaways
- Cubic yards = length (ft) x width (ft) x depth (ft) / 27. Turn inches into feet by dividing by 12.
- One cubic yard is 27 cubic feet. At 1 inch deep it covers 324 square feet.
- The depth depends on the job. Paver bedding sand is screeded about 1 inch deep (ICPI Tech Spec 2). For a pipe or a pool base, use the depth in the maker's instructions.
- Add a little for settling. Order River Sand to fill and bed, and Concrete Sand to bed pavers and level a pool base (which sand do you need).
- Sand is sold by the cubic yard or by the ton. The tons to cubic yards guide explains the switch.
The Formula
Sand is ordered by volume, and volume is length times width times depth. Work in feet. A depth in inches becomes feet when you divide it by 12: 2 inches is 2 / 12 = 0.167 feet.
Cubic feet = length x width x depth. Cubic yards = cubic feet / 27.
A cubic yard is a block 3 feet by 3 feet by 3 feet, which is 27 cubic feet. That is why every sand calculation ends in a division by 27.
How Far One Cubic Yard Goes
| Depth | Area one cubic yard covers |
|---|---|
| 1 inch | 324 square feet |
| 2 inches | 162 square feet |
| 3 inches | 108 square feet |
| 4 inches | 81 square feet |
| 6 inches | 54 square feet |
Thicker means shorter. Doubling the depth halves the area.
Cubic Yards for Common Sizes
| Area | 1 inch | 2 inches | 4 inches | 6 inches |
|---|---|---|---|---|
| 10 x 10 ft (100 sq ft) | 0.31 | 0.62 | 1.23 | 1.85 |
| 12 x 12 ft (144 sq ft) | 0.44 | 0.89 | 1.78 | 2.67 |
| 20 x 20 ft (400 sq ft) | 1.23 | 2.47 | 4.94 | 7.41 |
Each figure is cubic yards, rounded to two places. For a size not on the table, use the formula or the material calculator.
Four Worked Examples
A paver patio, 12 x 12 feet
Paver bedding sand is washed concrete sand, screeded to a nominal 1 inch, uncompacted, over a compacted base (ICPI Tech Spec 2). The same source gives the base itself as at least 4 inches for a walkway or patio on well-drained soil. The base is stone, not sand.
12 x 12 = 144 square feet. 1 inch = 0.083 feet. 144 x 0.083 = 12 cubic feet. 12 / 27 = 0.44 cubic yards of Concrete Sand. The layer is thin, so a small error in depth changes the total a lot. Screed it level and measure the depth in a few places. The whole method is in which sand goes under pavers.
A low spot, 20 x 10 feet
A hollow that is deepest in the middle and level with the ground at its edges averages less than its deepest point. Half of the deepest depth is a rough average that errs on the high side. Say it is 6 inches deep at the middle, so use 3 inches.
20 x 10 = 200 square feet. 3 inches = 0.25 feet. 200 x 0.25 = 50 cubic feet. 50 / 27 = 1.85 cubic yards of River Sand.
Fill in thin layers and compact each one: a hand tamper handles about 1 to 2 inches at a time, and a plate compactor 4 to 6 inches (Illinois Extension, 2020). If you plan grass, add the soil on top to your order too. The method for a whole yard is in how much fill dirt to raise a low yard.
A pipe trench, 40 feet long and 2 feet wide
How deep the bedding must be comes from the pipe's installation instructions or from the plumbing or utility rules for the job. Take 6 inches here as an example only.
40 x 2 = 80 square feet. 6 inches = 0.5 feet. 80 x 0.5 = 40 cubic feet. 40 / 27 = 1.48 cubic yards of River Sand or Concrete Sand, with a little extra because the pipe takes up some of the space and the trench is never perfectly straight.
Call 811 before you dig, so buried utility lines are marked first (811).
An above-ground pool pad, 15 feet across
A round pad is a circle, and its area is 3.14 x radius x radius. The radius is half the width: 7.5 feet.
3.14 x 7.5 x 7.5 = 177 square feet. Take 2 inches (0.167 feet) as an example, and use the depth in the pool maker's instructions. 177 x 0.167 = 29.5 cubic feet. 29.5 / 27 = 1.09 cubic yards of Concrete Sand. Measure the pad you will level, which runs wider than the pool itself, not only the pool.
Which Sand for Which Job
| Job | Sand | Where the depth comes from |
|---|---|---|
| Paver bedding | Concrete Sand | About 1 inch, uncompacted (ICPI) |
| Raising a low spot or yard | River Sand | The height you need, laid in thin compacted layers |
| Bedding a pipe | River Sand or Concrete Sand | The pipe's instructions or the job's rules |
| Leveling a pool pad | Concrete Sand | The pool maker's instructions |
| Fill under a pool deck | River Sand | The plans for the deck |
Rounding and Ordering
Sand settles and packs, and some is lost in handling, so order a little over your number. Do not round far above it: sand left on a driveway has to be moved.
Sand is sold by the cubic yard or by the ton, depending on the product, and the page for your address shows which. To go between the two, use the tons to cubic yards tool instead of a rule of thumb: the weight of a cubic yard changes with the sand and with how wet it is.
Delivery in Kenner, Metairie and Across Greater New Orleans
WAYS® delivers sand to Kenner, Metairie, New Orleans and the rest of the area it serves. Enter your address to see the sands we deliver to it and the price for that address before you pay.
Frequently Asked Questions
How do I calculate how much sand I need?
Multiply length by width in feet, then by depth in feet (inches divided by 12), then divide by 27. The result is cubic yards.
How many square feet does a cubic yard of sand cover?
At 1 inch deep, 324 square feet. At 2 inches, 162. At 4 inches, 81. At 6 inches, 54.
How much sand do I need under pavers?
A layer about 1 inch deep, uncompacted (ICPI Tech Spec 2). A 12 x 12 foot patio needs about 0.44 cubic yards.
How much sand do I need for a pool base?
Length times width times depth, with the depth taken from the pool maker's instructions. For a round pool, the area is 3.14 x radius x radius. A 15 foot round pad at 2 inches is about 1.09 cubic yards.
How much sand do I need to bed a pipe?
Trench length times width times the bedding depth the pipe's instructions call for, divided by 27. Call 811 before you dig.
Should I order a little extra?
Yes. Sand settles and packs once it is wet and compacted. Order a little over your number, not a lot.
See What We Deliver to Your Address
You have your number. Enter your address to see the delivered price for River Sand or Concrete Sand before you pay. If you are just outside our standard area, we will price it by hand.
Get your delivered price for your address
Materials for this job
Sources
Related guides
- Sand for Sandbags in New Orleans: River Sand Delivered
- Water Standing in Your Yard After Rain? New Orleans Fixes
- Which Sand Do You Need? River, Concrete or Masonry Sand
Delivered by city
River Sand
- River Sand Delivery in Avondale, LA
- River Sand Delivery in Chalmette, LA
- River Sand Delivery in Destrehan, LA
- River Sand Delivery in Edgard, LA
- River Sand Delivery in Garyville, LA
- River Sand Delivery in Gramercy, LA
- River Sand Delivery in Gretna, LA
- River Sand Delivery in Harahan, LA
- River Sand Delivery in Harvey, LA
- River Sand Delivery in Jefferson, LA
- River Sand Delivery in Kenner, LA
- River Sand Delivery in Metairie, LA
- River Sand Delivery in New Orleans, LA
- River Sand Delivery in Reserve, LA
- River Sand Delivery in Slidell, LA
- River Sand Delivery in Terrytown, LA
- River Sand Delivery in Violet, LA
Concrete Sand
- Concrete Sand Delivery in Avondale, LA
- Concrete Sand Delivery in Chalmette, LA
- Concrete Sand Delivery in Destrehan, LA
- Concrete Sand Delivery in Garyville, LA
- Concrete Sand Delivery in Gretna, LA
- Concrete Sand Delivery in Harahan, LA
- Concrete Sand Delivery in Harvey, LA
- Concrete Sand Delivery in Jefferson, LA
- Concrete Sand Delivery in Kenner, LA
- Concrete Sand Delivery in Metairie, LA
- Concrete Sand Delivery in New Orleans, LA
- Concrete Sand Delivery in Reserve, LA
- Concrete Sand Delivery in Violet, LA