Which Sand Do You Need? River, Concrete or Masonry Sand

Use river sand to raise and level ground, bed a pipe or fill under a pool deck. Use concrete sand under pavers and in concrete mixes. Use masonry sand for mortar, stucco and brick joints. The three look alike in a pile, but they are graded for different jobs, and the wrong one fails in a way you only see months later.

Key Takeaways

  • River sand has rounded grains and almost no clay. It is the sand for fill and pipe bedding.
  • Concrete sand is washed, angular and graded for concrete and paver bedding. The standard for it is ASTM C33 (ASTM C33).
  • Masonry sand is finer and graded for mortar. The standard for it is ASTM C144 (ASTM C144).
  • Do not swap them. Mortar made with the wrong sand weakens, and fill sand under pavers does not settle the way bedding sand does.
  • Sand is ordered in cubic yards or tons. Measure the area and the depth first (how to convert tons and cubic yards).

The Three Sands at a Glance

Sand What it is Use it for Do not use it for
River Sand Washed river sand, rounded grains, almost no clay Raising a low yard, pipe bedding, fill under pool decks, backfill around water and conduit lines Mortar, stucco
Concrete Sand Washed, angular grains, graded for concrete (ASTM C33) Bedding under pavers and flagstone, site-mixed concrete, leveling an above-ground pool base Joints between pavers (use a finer sand)
Masonry Sand Fine, washed and screened, even grading (ASTM C144) Brick and block mortar, stucco and plaster base coats, tuck-pointing Bulk fill, bedding layers

River Sand: For Fill and Pipe Bedding

River sand is what most people in the New Orleans area reach for when the job is to fill, level or bed something. The grains are rounded and the sand has almost no clay in it, so it spreads easily, and it packs when you wet it and tamp it. That is why it is the usual choice for raising a low yard, for bedding a pipe in a trench, and for filling under a pool deck.

Because it holds no clay, it also drains. Water moves through it instead of sitting in it. That helps around pipes and under decks. It also means river sand alone makes a poor top layer for a lawn: put it down as fill, then cover it with soil. Our guide on how much fill dirt to raise a low yard shows how to measure the depth, and the same math applies to sand. If you cannot decide between sand and dirt for the fill, see spillway dirt vs fill dirt vs topsoil.

River Sand is the product for this job.

Concrete Sand: The Paver and Concrete Sand

Concrete sand is washed and has sharp, angular grains. The angles lock together, which is what concrete and paver beds need. ASTM C33 is the standard for fine aggregate in concrete, and it is the same grading the paver industry names for bedding sand: washed concrete sand, screeded about 1 inch deep and left uncompacted over a compacted base (ICPI Tech Spec 2).

It also works as a thin leveling course under a slab or sidewalk before a pour, as bedding for a utility pipe, and as the leveling layer under an above-ground pool.

The full layer-by-layer method is in which sand goes under pavers. Concrete Sand is the product.

Masonry Sand: The Fine Sand for Mortar

Masonry sand is fine, washed and screened to an even size. ASTM C144 covers aggregate for masonry mortar. The even grading is what lets it blend cleanly and hold the cement paste, so it suits brick and block mortar, stucco and plaster base coats, and tuck-pointing old joints.

Its fine, even grading is also why it does not belong under pavers or in bulk fill. ICPI names masonry sand among the sands that should not be used as bedding because it does not compact evenly or drain (ICPI Tech Spec 2). Masonry Sand is the product for mortar work.

Match Your Project to the Sand

  • Raising a low spot in the yard: River Sand, topped with soil. For heavier clay-silt fill see Spillway Dirt.
  • A paver patio or walkway: Concrete Sand for bedding, over a packed Crushed Concrete base.
  • Laying brick or block, or patching stucco: Masonry Sand.
  • Bedding a drain or water pipe: River Sand or Concrete Sand.
  • Leveling the ground for an above-ground pool: Concrete Sand.
  • Mixing your own concrete: Concrete Sand.

How Much to Order

Sand is sold by the cubic yard or by the ton, depending on the product. One cubic yard is 27 cubic feet. The number to know is how far a cubic yard goes:

Depth Area one cubic yard covers
1 inch 324 square feet
2 inches 162 square feet
4 inches 81 square feet

To find your number, multiply length by width in feet, then by the depth in feet (inches divided by 12), then divide by 27. Add a little for settling. The material calculator does the work, and the tons to cubic yards guide explains the switch between the two units.

Delivery in Kenner, Metairie and Across Greater New Orleans

WAYS® delivers sand to Kenner, Metairie, New Orleans and the rest of the area it serves. Enter your address to see the sands we deliver to it and the price for that address before you pay.

Frequently Asked Questions

What is the difference between river sand and concrete sand?

River sand has rounded grains and almost no clay, and it is used for fill and bedding. Concrete sand has angular grains, is washed and graded to ASTM C33, and is used under pavers and in concrete.

Can I use river sand under pavers?

It is not the sand to choose. Paver bedding is washed concrete sand to ASTM C33, screeded about 1 inch deep. Use River Sand for fill below the base, not for the bedding layer.

Can I use masonry sand for fill?

You can, but it is the wrong tool. Masonry sand is fine and graded for mortar, not for bulk fill. Use River Sand for fill.

Which sand is best for filling a low yard?

River Sand. It spreads easily, packs with water and a tamp, and drains. Cover it with soil if you want grass.

Which sand do I need for mortar?

Masonry sand, graded to ASTM C144.

How much sand do I need?

Length times width times depth in feet, divided by 27, gives cubic yards. One cubic yard covers 324 square feet at 1 inch deep.

See What We Deliver to Your Address

You know the sand. Enter your address to see the delivered price for River Sand, Concrete Sand or Masonry Sand before you pay. If you are just outside our standard area, we will price it by hand.

Get your delivered price for your address

Materials for this job

Sources

  1. ASTM C33
  2. ASTM C144
  3. ICPI Tech Spec 2

Related guides

Delivered by city

River Sand

Concrete Sand